Required Tools and Equipment

Gather the following before starting installation so you don't have to interrupt the process.

Screwdrivers

• ·PH1 and PH2 Phillips-head screwdrivers
• ·T10 Torx screwdriver
• ·Flat-headed screwdriver (for removing gas sensor plugs, if fitting your own)

Mast installation

• ·Cutter for the stainless steel hose clamp supplied with the unit
• ·Screwdriver or 6 mm socket wrench to tighten the clamp

Wall installation

• ·Screwdriver and two screws sized for the wall material
• ·Four additional screws if a solar panel is being mounted on the wall alongside the unit